What is a key-in-knob lock?

Cylinder lock picking

The half-diamond pick is typically used for single pin picking, and it is especially useful for locks with smaller keyways, such as those found on padlocks or cabinet locks. The pointed end of the half-diamond pick can be used to maneuver around the pins and lift them to the correct height.

Like other lock picking tools, the half-diamond pick requires skill and practice to use effectively. It is important to apply the right amount of pressure and use the right technique to lift each pin, and to adjust the tension wrench as needed to ensure that the pins stay in place once they are lifted.

Overall, the half-diamond pick is a versatile tool that can be used to pick a wide variety of locks, and it is a useful addition to any lock picker's toolkit.

A snake rake pick, also known as a C-rake or a zig-zag rake, is a type of lock picking tool that is designed to quickly and easily rake multiple pins in a lock at the same time. The snake rake pick is shaped like a long, thin, wavy line, with several small peaks and valleys along its length.

To use a snake rake pick, the picker inserts the tool into the keyway and then moves it up and down rapidly, raking the pins back and forth. This technique can often set multiple pins at the same time, allowing the lock to be opened quickly and easily.

Snake rake picks are often used for picking locks that have relatively low security, such as padlocks or simple door locks. They are less effective on more advanced locks, which have pins that are designed to resist raking.

While snake rake picks are relatively easy to use and can be very effective, they are not always the best choice for every situation. In some cases, a more precise and controlled approach may be needed, which requires using other types of lock picking tools, such as a hook pick or a diamond pick.

A city rake pick, also known as a L-rake or a double-ball rake, is a type of lock picking tool that is designed to quickly and easily rake multiple pins in a lock at the same time. The city rake pick is shaped like a letter "L", with two small peaks on the end of a long, thin shaft.

Lever lock picking

What is a mortise lock?

To use a city rake pick, the picker inserts the tool into the keyway and then moves it up and down rapidly, raking the pins back and forth. This technique can often set multiple pins at the same time, allowing the lock to be opened quickly and easily.

City rake picks are often used for picking locks that have relatively low security, such as padlocks or simple door locks. They are less effective on more advanced locks, which have pins that are designed to resist raking.

While city rake picks are relatively easy to use and can be very effective, they are not always the best choice for every situation. In some cases, a more precise and controlled approach may be needed, which requires using other types of lock picking tools, such as a hook pick or a diamond pick.

How does a mortise lock work?

A bogota rake pick, also known as a triple peak or a CPT pick, is a type of lock picking tool that is designed to quickly and easily rake multiple pins in a lock at the same time. The bogota rake pick is a thin, double-sided tool that features two or more peaks on each end, giving it a distinctive "V" shape.

To use a bogota rake pick, the picker inserts the tool into the keyway and then moves it up and down rapidly, raking the pins back and forth. This technique can often set multiple pins at the same time, allowing the lock to be opened quickly and easily.

Bogota rake picks are often used for picking locks that have relatively low security, such as padlocks or simple door locks. They are less effective on more advanced locks, which have pins that are designed to resist raking.

What is a jimmy-proof lock?

While bogota rake picks are relatively easy to use and can be very effective, they are not always the best choice for every situation. In some cases, a more precise and controlled approach may be needed, which requires using other types of lock picking tools, such as a hook pick or a diamond pick.

A tension wrench, also known as a torque wrench or a torsion wrench, is a common tool used in lock picking. It is a thin, flat piece of metal, typically L-shaped, that is inserted into the bottom of a lock's keyway and used to apply rotational force to the lock cylinder.

The purpose of a tension wrench is to create tension or torque on the lock's cylinder, holding the pins in place and allowing the lock picker to manipulate the individual pins with a pick tool. By applying the correct amount of tension to the cylinder and manipulating the pins with the pick tool, the lock can be opened without the use of a key.

How does a jimmy-proof lock work?

Tension wrenches come in a variety of shapes and sizes to accommodate different types of locks and keyways. They can be made from a variety of materials, including stainless steel and titanium, and can be purchased individually or as part of a lock picking set.

While tension wrenches are an essential tool for lock picking, they require skill and practice to use effectively. The lock picker must apply the correct amount of tension to the cylinder and manipulate the pins in a precise and controlled manner in order to successfully open the lock.

A torsion wrench, also known as a tension wrench, is a tool used in lock picking. It is a thin, flat piece of metal, usually L-shaped, that is inserted into the bottom of a lock's keyway and used to apply rotational force to the lock cylinder.

What is a rim lock?

The purpose of a torsion wrench is to create tension or torque on the lock's cylinder, holding the pins in place and allowing the lock picker to manipulate the individual pins with a pick tool. By applying the correct amount of tension to the cylinder and manipulating the pins with the pick tool, the lock can be opened without the use of a key.

Torsion wrenches come in a variety of shapes and sizes to accommodate different types of locks and keyways. They can be made from a variety of materials, including stainless steel and titanium, and can be purchased individually or as part of a lock picking set.

While torsion wrenches are an essential tool for lock picking, they require skill and practice to use effectively. The lock picker must apply the correct amount of tension to the cylinder and manipulate the pins in a precise and controlled manner in order to successfully open the lock.

A key extractor is a tool used in lock picking to remove broken keys from a lock cylinder. When a key breaks off inside a lock, it can be very difficult to remove the broken piece without damaging the lock. This is where a key extractor comes in.